Diisopropyl ether CAS#108-20-3
CAS Number: 108-20-3
Chemical Formula: C6H14O
Synonyms:
DI-ISO-PROPYL ETHER PURISS. P.A.,STABILIZED
Isopropyl ether, stabilized with 100-200 ppm BHT
2,2’-oxybis-Propane
MOQ (Minimum Order Quantity): 1 FCL (Full Container Load)
Appearance: Liquid
Diisopropyl ether CAS#108-20-3
Diisopropyl ether [108-20-3], also known as 2-isopropoxyisopropane or isopropyl ether, is a clear, colorless, mobile, highly flammable liquid with a characteristic ethereal odor. Its solubility in water is low, but it is soluble in organic solvents and readily forms explosive peroxides. It has a higher boiling point, a lower vapor pressure, and a lower water solubility than diethyl ether, which means that diisopropyl ether can be recovered without significant loss after use as a solvent or as an extractant.
| Diisopropyl ether Chemical Properties |
| Melting point | -85.5 °C |
| Boiling point | 68-69 °C(lit.) |
| density | 0.725 g/mL at 25 °C(lit.) |
| vapor density | 3.5 (vs air) |
| vapor pressure | 120 mm Hg ( 20 °C) |
| refractive index | n |
| Fp | −29 °F |
| storage temp. | Store below +30°C. |
| solubility | 3.11g/l |
| form | Liquid |
| color | APHA: ≤25 |
| Relative polarity | 2.2 |
| Odor | Sweet, slightly sharp; characteristic pungent; ethereal; like amphor and ethyl ether. |
| PH | 7 (20°C) |
| explosive limit | 1-21%, 100°F |
| Water Solubility | 9 g/L (20 ºC) |
| Merck | 14,5212 |
| BRN | 1731256 |
| Henry's Law Constant | 2.57 at 25 °C (headspace-GC, Arp and Schmidt, 2004) |
| Dielectric constant | 3.9(25℃) |
| Exposure limits | TLV-TWA 1045 mg/m3 (250 ppm) (ACGIH), 2090 mg/m3 (500 ppm) (OSHA); STEL 1300 mg/m3 (310 ppm) (ACGIH). |
| Stability: | Extremely flammable. This material is a serious fire and explosion risk. Vapour may travel considerable distances to an ignition source, which need not be an open flame, but may be a hot plate, steam pipe, etc. Vapour may be ignited by the static electricty which can build up when isopropyl ether is being poured from one vessel |
| LogP | 2.4 at 20℃ |
| Surface tension | 17.74mN/m at 293.15K |
| CAS DataBase Reference | 108-20-3(CAS DataBase Reference) |
| NIST Chemistry Reference | Diisopropyl ether(108-20-3) |
| EPA Substance Registry System | Isopropyl ether (108-20-3) |
| Safety Information |
| Hazard Codes | F |
| Risk Statements | 11-19-66-67-52/53 |
| Safety Statements | 9-16-29-33-61 |
| RIDADR | UN 1159 3/PG 2 |
| OEB | A |
| OEL | TWA: 500 ppm (2100 mg/m3) |
| WGK Germany | 1 |
| RTECS | TZ5425000 |
| F | 10 |
| Autoignition Temperature | 827 °F |
| HS Code | 2909 19 90 |
| HazardClass | 3 |
| PackingGroup | II |
| Hazardous Substances Data | 108-20-3(Hazardous Substances Data) |
| Toxicity | LD50 in 14 day old, young adult, adult rats (ml/kg): 6.4, 16.5, 16.0 orally (Kimura) |
| IDLA | 1,400 ppm [10% LEL] |
Product Application of Diisopropyl ether CAS#108-20-3
Isopropyl ether is used as a solvent for oils,waxes, resins, and dyes; and as a varnishremover.
Factory and Equipment Show
Fast delivery time
Inventory 2-3 working days New production 7-10 working days


